Spring to see it colorful, summer to enjoy passion overflowing, autumn perception of life surging, winter to see the ice. Property and their own conditions allow, of course, there is sunshine room is the best choice.
Sunshine room can increase the leisure and rest space of the house, and increase many points for high-quality home life. For men, it is a necessary home space for friends to get together for leisure and tea drinking. For women, it is also a good place to plant flowers and plants, yoga and fitness, and cultivate literature and art. Therefore, the sunshine room is a necessary optimization addition to the home.
The sunlight room is composed of frame, glass top and facade windows. The basic elements are frame and glass. Then we will analyze it from the following points.
1、 Top surface.
The top surface is composed of the sunlight room frame, water channel, drainage pipe and glass. Frame materials can be divided into iron, stainless steel, aluminum alloy. Iron will be used for a long time, the paint will fall off, so it is less used in home life. The cost of stainless steel is very high under the condition of allowable wall thickness, so the cost performance ratio is low and it is not commonly used. The sunlight aluminum alloy on the wall is very strong, that is to say, the aluminum alloy room with strong resistance to the market. Aluminum alloy sunlight room is divided into broken bridge sunlight room and non broken bridge sunlight room. Compared with the two, the disadvantage of the non broken bridge sunlight house is the high thermal conductivity, and the advantage is that the price is lower than that of the broken bridge sunlight room. Under the same aluminum alloy model and glass model, the unit price of non broken bridge is about 600 yuan lower than that of broken bridge sunshine room. So the owner should choose according to his actual situation! If the requirement of heat insulation is high, the broken bridge aluminum alloy sunlight room can be selected.
The top glass is also very important. In order to achieve safety and thermal insulation, it is best to select laminated + insulating glass, commonly used as 5mm + 1C + 5mm + 12a + 5mm, 6mm + 1C + 6mm + 12a + 6mm, etc. because even if the glass is damaged, the lower laminated glass will not fall down and cause injury to personnel. The upper part is insulating glass, which can reduce the heat conduction, thus playing the role of heat conduction and heat insulation. If the requirement of heat insulation is very high, the top glass can be coated glass, namely Low-E glass, which can reduce the heat conduction on the original basis.
2、 Facade.
To ensure thermal insulation, the window on the facade should also choose the broken bridge aluminum + insulating glass. The wall thickness of aluminum load-bearing parts of bridge break should not be less than 1.4mm, and the glass should be 5mm + 12a + 5mm. In the opening mode, the author suggests to use the flat opening mode, because the air tightness of this way is better than that of sliding window! Because push-pull is the movement mode of bottom pulley structure, there is bound to be a gap, so the air tightness will be greatly reduced.
3、 We should also pay attention to the following points when purchasing sunshine room:
1. Effective drainage and waterproof: if the sunlight room does not have a certain slope, it will cause ponding somewhere. Therefore, it is very important to design a slope that meets the requirements. At the same time, the rainwater can be drained reasonably by combining the water guide channel and the drainage pipe, so as to avoid the noise of water dripping and give people a quiet hearing environment. Waterproof treatment is very important to avoid future home invasion and leakage of trouble.
2. Easy to clean: the roof can be cleaned by opening the skylight.
address：yeyon Sunshine Room, Weiqiao Aluminum Deep Processing Industrial Park, Zouping City, Shandong Province
